Petals Documentation > Petals ESB > Petals Components > Petals-SE-BPMN2 1.0.0-SNAPSHOT

Petals-SE-BPMN2 1.0.0-SNAPSHOT

The page Petals-SE-BPMN2 does not exist.
Table of contents
Contributors
No contributors found for: authors on selected page(s)

Introduction

The version 1.0.0 of the component embeds the BPMN 2.0 engine "Activiti". In this first version, only Activiti extensions can be used at the runtime level.

Using the mode "service"

Creating a service-unit for a process definition

Creating the service contract

The SE BPMN2 provides a service with several operation for a process definition. A WSDL is associated to this service. This WSDL can be written freely. The user can use its own namespace, its own names, ... It is only constraint by the following rules:

  • the operations of the binding section are annotated to link them to the supported operations (create an instance of the process definition, complete the current task of the process instance, ...)
  • the mandatory parameters of the operation are annotated to retrieve the right values.
For a unit test purpose, an extension of JUnit is available to validate your WSDL not only in a pur WSDL point of view, but also in a SE BPMN2 point of view. See chapter "[Unit testing]".

Identifying operations

The mapping between operations of the WSDL and operations supported by the BPMN 2.0 embedded in the SE BPMN2 is declared using a dedicated binding. The binding "BPMN2" is done adding the element {http://petals.ow2.org/se/bpmn2.0/1.0}operation to the element operation of the binding. Its attribute bpmnAction defines the operation that will be executed.

Identifying input parameters of operations

In the same way, input parameters of operations are mapped through an annotation placed inside the message of the binding operation. Two natures of input parameters exists: the expected input parameters and variables. Each BPMN 2.0 engine API operation can require mandatory or optional input parameter and can accept to set several variables in the same time.

Input parameters are identified by the annotation adding the element {http://petals.ow2.org/se/bpmn2.0/1.0}input-parameter. This annotation takes also two attributes:

  • the attribute name defines a name of an expected input parameter of the BPMN 2.0 engine API operation,
  • the attribute value defines the value to set to the expected input parameter using an XPath expression or a constant value.
    See operation details to know the expected input parameters.

Variables are identified by the annotation adding the element {http://petals.ow2.org/se/bpmn2.0/1.0}variable. This annotation takes also two attributes:

  • the attribute name defines the variable name used in the process definition.
  • the attribute value defines the value to set to the variable using an XPath expression.
    See operation details to know if variables can be set.
    No extra check is done by the SE BPMN2 about the compliance of the variable with the process definition.

TODO. Les types ?; les arborescences

Identifying output parameters of operations

Output parameters of the BPMN 2.0 engine API operation can not be set into the output reply of the service operation using a simple XPath expression as for input parameters. An XSL style-sheet is required to generated the full output reply. It is identified using the annotation adding the element {http://petals.ow2.org/se/bpmn2.0/1.0}output. The XSL style-sheet name is set into the attribute xsl and loaded from the classloader. The XSL style-sheets are mainly located in the service-units, they can also be packaged as a shared library.

According to the operation executed by the BPMN 2.0 engine, its output parameters are transmitted to the XSL style-sheet through XSL parameters. You will use these XSL parameters to generate your service reply from your service request payload. See operation details to know the available XSL parameters.

For a unit test purpose, an extension of JUnit is available to test your XSL. See chapter "[Unit testing]".

What about fault ?

Associating an operation to the creation of an process definition instance

The operation creating instances of process definition is identified by the value startEvent set on the attribute bpmnAction.

This operation accepts variables and requires the following input parameters:

Input parameter name Type Description Required
processId String constant The process identifier of the process definition for which an instance must be created. If more than one process definition exist in the service-unit, this input parameter is required.
startEventId String constant The identifier of the start event task of the process definition to use to create the new process definition instance. If more than one start event task exist in the process definition, this input parameter is required.

The XSL parameters available to generate the service output reply are:

XSL parameter name Type Description
processInstanceId String Identifier of the process instance created

It is possible to map several operations of the WSDL to the creation of process instances, but this has perhaps no sens.

WSDL mapping sample
<wsdl:binding name="Order" xmlns:bpmn="http://petals.ow2.org/se/bpmn2.0/1.0">
   <wsdl:operation name="newOrder" type="...">
      <bpmn:operation bpmnAction="startEvent" />
      <bpmn:input-parameter name="processId" value="newOrder" />
      <bpmn:input-parameter name="startEvent" value="default" />
      <bpmn:variable name="customerName" value="/newOrderRequest/customerName" />
      <bpmn:variable name="address" value="/newOrderRequest/address" />
      <bpmn:output xsl="newOrderOutput.xsl" />
      <wsdl:input/>
      <wsdl:output/>
   </wsdl:operation>
</wsdl:binding>
Associated input request
<newOrderRequest>
   <customerName>Mr Dupont Martin</customerName>
   <address>23, rue de la Paie, 75000 Paris</address>
</newOrderRequest>
Associated output request
<newOrderResponse>
   <orderNumber>12345</orderNumber>
</newOrderResponse>

Associating an operation to the completion of a process instance task

The operation completing a task of a process instance is identified by the value userTask set on the attribute bpmnAction

This operation accepts variables and requires the following input parameters:

Input parameter name Type Description Required
processInstanceId XPath expression result as String Identifier of the process instance created Yes
taskDefinitionKey String constant Name of the task in the process definition. Yes

Note: The completion status of the task is a variable and so it takes any form.

No XSL parameters is available to generate the service output reply. Your XSL style-sheet will be a "constant" style-sheet.

A such operation is defined for each task of the process definition to complete. C'est le cas d'un service par tache à terminer. Essayer de mieux expliquer..

Mapping des parametres à faire

WSDL mapping sample
<wsdl:binding name="Order" xmlns:bpmn="http://petals.ow2.org/se/bpmn2.0/1.0" >
   <wsdl:operation name="validOrder">
      <bpmn:operation bpmnAction="userTask" />
      <bpmn:input-parameter name="processInstanceId" value="/validOrderRequest/orderId" />
      <bpmn:input-parameter name="taskDefinitionKey" value="validOrder" />
      <bpmn:variable name="validationApproved" value="/validOrderRequest/isValidated" />
      <bpmn:variable name="creditCardNumber" value="/validOrderRequest/creditCardNumber" />
      <bpmn:output xsl="validOrderOutput.xsl" />
      <wsdl:input/>
      <wsdl:output/>
   </wsdl:operation>
</wsdl:binding>
Associated input request
<validOrderRequest>
   <orderId>12345</orderId>
   <isValidated>true</isValidated>
   <creditCardNumber>1234567890123</customerName>
</validOrderRequest>
Associated output request
<validOrderResponse />

Associating an operation to retrieve process instances

The operation retrieving process instances is identified by the value retrieveProcInst set on the attribute bpmnAction:

<wsdl:binding name="Order" xmlns:bpmn="http://petals.ow2.org/se/bpmn2.0/1.0">
   <wsdl:operation name="searchOrder" type="...">
      <bpmn:operation bpmnAction="retrieveProcInst" />
      <bpmn:input-parameter name="isActive" value="/searchOrderRequest/isInProgress" />
      <bpmn:input-parameter name="responsibleUser" value="/searchOrderRequest/responsibleUser" />
      <bpmn:input-parameter name="responsibleGroup" value="/searchOrderRequest/responsibleGroup" />
      <bpmn:output xsl="searchOrderOutput.xsl" />
      <wsdl:input/>
      <wsdl:output/>
   </wsdl:operation>
</wsdl:binding>

This operation requires the following input parameters:

Input parameter name Type Description Required
isActive Boolean Only active task are returned. No
responsibleUser String Only select tasks for which the given user is a candidate are returned. No
responsibleGroup String Only select tasks for which users in the given group are candidates are returned. No

It does not use variables.

The process instances returned by the component are all associated to the current process definition (the process definition packaged in the service unit).

The XSL parameters available to generate the service output reply are:

XSL parameter name Type Description
processInstances Quel type 'list' est exploitable coté XSL The list of process instance identifier matching criteria.

It is possible to map several operations of the WSDL to search process instance, for example with different search criteria.

Deploying a service unit

When deploying the service unit on the SE BPMN2, the embedded process definition is automatically deployed into the BPMN 2.0 engine, and the associated services are registered.

When a Petals ESB node restarts, all service units previously deployed are redeployed. So if a process definition is already registered in the BPMN 2.0 engine, its registration is skipped without any message.
To be able to fix a process definition, you must create a new version of the process definition

Undeploying a service unit

When undeploying a service unit from the SE BPMN2, the embedded process definition is deregistered from the BPMN 2.0 engine, and the assocaited services are unregistered.
Que faire si il y a encore de process instances en cours ?

Using the mode "integration"

The mode "integration" provides different services to interact directly with the BPMN 2.0 engine embedded in the SE BPMN 2.0. It goes back over the BPMN 2.0 engine API. Available services are:

Interface name Service name Description
Runtime RuntimeService To manage process instances
Task TaskService To manage task of process instances

A completer avec Bertrand

For this version of the SE BPMN 2.0, see the WSDL of the service and the Activiti Java API documentation to get more information.

The namespace of interface name and service name is http://petals.ow2.org/se/bpmn2.0/1.0

The service "RuntimeService"

The service "RuntimeService" provides following operations

Operation name Description Matching Activity Java API
startProcessInstanceById Starts a new process instance in the latest version of the process definition with the given id and variables. RuntimeService.startProcessInstanceById(String, Map<String,Object>)
startProcessInstanceByKey Starts a new process instance in the latest version of the process definition with the given key and variables. RuntimeService.startProcessInstanceByKey(String, Map<String,Object>)

A completer avec Bertrand

The service "TaskService"

The service "TaskService" provides following operations

Operation name Description Matching Activity Java API
complete Called when the task is successfully executed, and the required task parameters are given by the end-user. TaskService.complete(String, Map<String,Object>)

A completer avec Bertrand

Configuring the component

The component can be configured through the parameters of its JBI descriptor file. These parameters are divided in following groups:

  • JBI parameters that have not to be changed otherwise the component will not work,
  • CDK parameters that are parameters driving the processing of the CDK layer,
  • and *BPMN 2.0 engine parameters" that are relative to the BPMN 2.0 engine.

TODO: Mettre une copie en exemple d'un descripteur JBI du SE

<?xml version="1.0" encoding="UTF-8"?>
<jbi
	version="1.0"
	xmlns='http://java.sun.com/xml/ns/jbi'
	xmlns:xsi='http://www.w3.org/2001/XMLSchema-instance'
	xmlns:petalsCDK="http://petals.ow2.org/components/extensions/version-5"
	xmlns:xslt="http://petals.ow2.org/components/bpmn/version-1">

	<component type="service-engine">
		<identification>
			<name>petals-se-bpmn2</name>
			<description>An BPMN 2.0 Service Engine</description>
		</identification>

		<component-class-name description="BPMN 2.0 Component class">org.ow2.petals.se.bpmn2.Bpmn2Se</component-class-name>
		<component-class-path><path-element/></component-class-path>
		<bootstrap-class-name>org.ow2.petals.component.framework.DefaultBootstrap</bootstrap-class-name>
		<bootstrap-class-path><path-element/></bootstrap-class-path>

		<petalsCDK:acceptor-pool-size>3</petalsCDK:acceptor-pool-size>
		<petalsCDK:processor-pool-size>10</petalsCDK:processor-pool-size>
		<petalsCDK:processor-max-pool-size>50</petalsCDK:processor-max-pool-size>
		<petalsCDK:properties-file></petalsCDK:properties-file>
		<petalsCDK:jbi-listener-class-name>org.ow2.petals.se.bpmn2.BPMN2JBIListener</petalsCDK:jbi-listener-class-name>
	</component>
</jbi>

CDK parameters

The component configuration includes the configuration of the CDK. The following parameters correspond to the CDK configuration.

Configuration of the component, CDK part

Parameter Description Default Required Scope
acceptor-pool-size The size of the thread pool used to accept Message Exchanges from the NMR. Once a message is accepted, its processing is delegated to the processor pool thread.
3
Yes
Runtime
acceptor-retry-number Number of tries to submit a message exchange to a processor for processing before to declare that it cannot be processed.
40
No
Installation
acceptor-retry-wait Base duration, in milliseconds, to wait between two processing submission tries. At each try, the new duration is the previous one added by this base duration multiplied by the try number plus a random value between 0 and 10.
250
No
Installation
acceptor-stop-max-wait The max duration (in milliseconds) of the stop of an acceptor before to force it to stop.
500
No
Runtime
message-processor-max-pool-size Max size of the object pool containing message exchange processors.
processor-max-pool-size
No
Runtime
processor-pool-size The size of the thread pool used to process Message Exchanges. Once a message is accepted, its processing is delegated to one of the thread of this pool.
10
Yes
Runtime
processor-max-pool-size The maximum size of the thread pool used to process Message Exchanges. The difference between this size and the processor-pool-size represents the dynamic threads that can be created and destroyed during overhead processing time.
50
No
Runtime
processor-keep-alive-time When the number of processors is greater than the core, this is the maximum time that excess idle processors will wait for new tasks before terminating, in seconds.
300
No
Runtime
processor-stop-max-wait The max duration (in milliseconds) of message exchange processing on stop phase.
15000
No
Runtime
time-beetween-async-cleaner-runs The time (in milliseconds) between two runs of the asynchronous message exchange cleaner.
2000
No
Installation
properties-file Name of the file containing properties used as reference by other parameters. Parameters reference the property name in the following pattern ${myPropertyName}. At runtime, the expression is replaced by the value of the property.

The value of this parameter is :
  • an URL
  • a file relative to the PEtALS installation path
  • an empty value to stipulate a non-using file
-
No
Installation
monitoring-sampling-period Period, in seconds, of a sample used by response time probes of the monitoring feature.
300
No
Installation

Definition of CDK parameter scope :

  • Installation: The parameter can be set during the installation of the component, by using the installation MBean (see JBI specifications for details about the installation sequence). If the parameter is optional and has not been defined during the development of the component, it is not available at installation time.
  • Runtime: The paramater can be set during the installation of the component and during runtime. The runtime configuration can be changed using the CDK custom MBean named RuntimeConfiguration. If the parameter is optional and has not been defined during the development of the component, it is not available at installation and runtime times.

Interceptor

Interceptors can be defined to inject some post or pre processing in the component during service processing.

Using interceptor is very sensitive and must be manipulate only by power users. An non properly coded interceptor engaged in a component can lead to uncontrolled behaviors, out of the standard process.

Example of an interceptor configuration:

<?xml version="1.0" encoding="UTF-8"?>
<!--...-->
<petalsCDK:component-interceptors>
  <petalsCDK:interceptor active="true" class="org.ow2.petals.myInterceptor" name="myInterceptorName">
    <petalsCDK:param name="myParamName">myParamValue</petalsCDK:param>
    <petalsCDK:param name="myParamName2">myParamValue2</petalsCDK:param>
  </petalsCDK:interceptor>
</petalsCDK:component-interceptors>
<!--...-->

Interceptors configuration for Component (CDK)

Parameter Description Default Required
interceptor - class Name of the interceptor class to implement. This class must extend the abstract class org.ow2.petals.component.common.interceptor.Interceptor. This class must be loadable from the component classloader, or in a dependent Shared Library classloader. - Yes
interceptor - name Logical name of the interceptor instance. It can be referenced to add extended parameters by a SU Interceptor configuration. - Yes
interceptor - active If true, the Interceptor instance is activated for every SU deployed on the component.
If false, the Interceptor can be activated:
-by the InterceptorManager Mbean at runtime, to activate the interceptor for every deployed SU.
-by a SU configuration 		- Yes
param[] - name The name of the parameter to use for the interceptor. - No
param[] The value of the parameter to use for the interceptor. - No

Component specific parameters

These parameters drive features proposed by the component and configure the BPMN 2.0 engine "Activiti 5.14" embedded in the SE:

  • activation of the mode 'integration',
  • database parameters. Your are responsible to provide this database according to your needs. And especially, you must assume that the database is highly available to have a SE BPMN2 highly available.
Configuration of the component, Specific parameter part, Database

Parameter Description Default Required Scope
integration-mode-enable Enable the mode 'Integration'
true
No
Installation
jdbc-url URL of the database. The default database is an in-memory database
jdbc:h2:mem:activiti;DB_CLOSE_DELAY=1000
Yes
Installation
jdbc-driver JDBC driver. Except for the default JDBC driver, it must be provided as shared-library.
org.h2.Driver
Yes
Installation
jdbc-username Username used for the database connection.
sa
Yes
Installation
jdbc-password Passwrd used for the database connection.
""
Yes
Installation
jdbc-max-active-connections The number of idle connections that the database connection pool at maximum at any time can contain.
10
No
Runtime
jdbc-max-idle-connections The number of active connections that the database connection pool at maximum at any time can contain.
-
No
Runtime
jdbc-max-checkout-time The amount of time in milliseconds a connection can be 'checked out' from the connection pool before it is forcefully returned.
20000 (20 seconds)
No
Runtime
jdbc-max-wait-time This is a low level setting that gives the pool a chance to print a log status and re-attempt the acquisition of a connection in the case that it’s taking unusually long (to avoid failing silently forever if the pool is misconfigured).
20000 (20 seconds)
No
Runtime

Logging

To enable traces of the BPMN 2.0 engine "Activiti", you add in the logging configuration file of Petals ESB the following logger with the right level: xxxx

Monitoring the component

In this documentation, the term "Allocated threads" must be understood as "Active threads", see PETALSDISTRIB-37. This naming error will be fixed in the next version.

Using metrics

Several probes providing metrics are included in the component, and are available through the JMX MBean 'org.ow2.petals:type=custom,name=monitoring_<component-id>', where <component-id> is the unique JBI identifier of the component.

Common metrics

The following metrics are provided through the Petals CDK, and are common to all components:

Metrics, as MBean attribute Description Detail of the value Configurable
MessageExchangeAcceptorThreadPoolMaxSize The maximum number of threads of the message exchange acceptor thread pool integer value, since the last startup of the component yes, through acceptor-pool-size
MessageExchangeAcceptorThreadPoolCurrentSize The current number of threads of the message exchange acceptor thread pool. Should be always equals to MessageExchangeAcceptorThreadPoolMaxSize. instant integer value no
MessageExchangeProcessorObjectPoolBorrowedObjectsCurrent The current number of borrowed object of the message exchange processor object pool instant integer value no
MessageExchangeProcessorObjectPoolBorrowedObjectsMax The maximum number of object of the message exchange processor object pool that was borrowed integer value, since the last startup of the component no
MessageExchangeProcessorObjectPoolIdleObjectsCurrent The current number of idel object of the message exchange processor object pool instant integer value no
MessageExchangeProcessorObjectPoolIdleObjectsMax The maximum number of object of the message exchange processor object pool that was idle integer value, since the last startup of the component no
MessageExchangeProcessorObjectPoolMaxSize The maximum size, in objects, of the message exchange processor object pool instant integer value yes, through processor-max-pool-size
MessageExchangeProcessorObjectPoolMinIdleSize The minimum size, in objects (in state idle), of the message exchange processor object pool instant integer value yes, through processor-pool-size
MessageExchangeProcessorObjectPoolExhaustion The number of message exchange processor object pool exhaustions integer counter value, since the last startup of the component no
MessageExchangeProcessorThreadPoolAllocatedThreadsCurrent The current number of allocated threads of the message exchange processor thread pool instant integer value no
MessageExchangeProcessorThreadPoolAllocatedThreadsMax The maximum number of threads of the message exchange processor thread pool that was allocated integer value, since the last startup of the component no
MessageExchangeProcessorThreadPoolIdleThreadsCurrent The current number of idle threads of the message exchange processor thread pool instant integer value no
MessageExchangeProcessorThreadPoolIdleThreadsMax The maximum number of threads of the message exchange processor thread pool that was idle integer value, since the last startup of the component no
MessageExchangeProcessorThreadPoolMaxSize The maximum size, in threads, of the message exchange processor thread pool instant integer value yes, through http-thread-pool-size-max
MessageExchangeProcessorThreadPoolMinSize The minimum size, in threads, of the message exchange processor thread pool instant integer value yes, through http-thread-pool-size-min
MessageExchangeProcessorThreadPoolQueuedRequestsCurrent The current number of enqueued requests waiting to be processed by the message exchange processor thread pool instant integer value no
MessageExchangeProcessorThreadPoolQueuedRequestsMax The maximum number of enqueued requests waiting to be processed by the message exchange processor thread pool that was allocated since the last startup of the component instant integer value no
ServiceProviderInvokations The number of service provider invokations grouped by:
  • interface name, as QName, the invoked service provider,
  • service name, as QName, the invoked service provider,
  • invoked operation, as QName,
  • message exchange pattern,
  • and execution status (PENDING, ERROR, FAULT, SUCCEEDED).
 integer counter value since the last startup of the component no
ServiceProviderInvokationsResponseTimeAbs The aggregated response times of the service provider invokations since the last startup of the component grouped by:
  • interface name, as QName, the invoked service provider,
  • service name, as QName, the invoked service provider,
  • invoked operation, as QName,
  • message exchange pattern,
  • and execution status (PENDING, ERROR, FAULT, SUCCEEDED).
 n-tuple value containing, in millisecond:
  • the maximum response time,
  • the average response time,
  • the minimum response time.
 no
ServiceProviderInvokationsResponseTimeRel The aggregated response times of the service provider invokations on the last sample, grouped by:
  • interface name, as QName, the invoked service provider,
  • service name, as QName, the invoked service provider,
  • invoked operation, as QName,
  • message exchange pattern,
  • and execution status (PENDING, ERROR, FAULT, SUCCEEDED).
 n-tuple value containing, in millisecond:
  • the maximum response time,
  • the average response time,
  • the minimum response time,
  • the 10-percentile response time (10% of the response times are lesser than this value),
  • the 50-percentile response time (50% of the response times are lesser than this value),
  • the 90-percentile response time (90% of the response times are upper than this value).
 no

Dedicated metrics

No dedicated metric is available.

Receiving alerts

Several alerts are notified by the component through notification of the JMX MBean 'org.ow2.petals:type=custom,name=monitoring_<component-id>', where <component-id> is the unique JBI identifier of the component.

To integrate these alerts with Nagios, see Receiving Petals ESB defects in Nagios.

Common alerts

Defect JMX Notification
A message exchange acceptor thread is dead
  • type: org.ow2.petals.component.framework.process.message.acceptor.pool.thread.dead
  • no user data
No more thread is available in the message exchange acceptor thread pool
  • type: org.ow2.petals.component.framework.process.message.acceptor.pool.exhausted
  • no user data
No more message exchange processor is available in the message exchange processor pool
  • type: org.ow2.petals.component.framework.process.message.processor.object.pool.exhausted
  • no user data
No more thread is available to run a message exchange processor
  • type: org.ow2.petals.component.framework.process.message.processor.thread.pool.exhausted
  • no user data

Dedicated alerts

No dedicated alert is available.

Unit testing

An extension of JUnit is available:

  • to validate your WSDL,
  • to test unitary your XSLs.

Validating your WSDL

TODO

Unit-testing your XSD

A framework is available to unit-test the service unit deployed on the SE BPMN2. It provides facilities for:

  • check the compliance of the WSDL with the attendees of the component,
  • verify easily the XSL used to generate output replies.

Checking the compliance of the WSDL

The unit test framework contains an assertion 'assertIsCompliant' to verify easily the compliance of your WSDL with the attendees of the mode 'service':

import static org.junit.Assert.assertNotNull;
import static org.ow2.petals.se.bpmn2.unittest.Assert.assertIsCompliant;

import java.io.InputStream;

import org.junit.Test;

public class WSDLComplianceTest {

    @Test
    public void testWSDLCompliance() {
        final InputStream isWsdl = Thread.currentThread().getContextClassLoader()
                .getResourceAsStream("myService.wsdl");
        assertNotNull("WSDL not found as resource !", isWsdl);
        assertIsCompliant("WSDL not compliant with SE BPMN2 attendes !", isWsdl);
    }

}

Testing your XSL

TODO

Annex: Sample WSDL

Abstract part:

<?xml version="1.0" encoding="UTF-8"?>
<wsdl:definitions xmlns:tns="http://petals.ow2.org/se/bpmn2/sample/order"
	xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
	targetNamespace="http://petals.ow2.org/se/bpmn2/sample/order">

	<!-- Type definitions for input and output parameters for service -->
	<wsdl:types>
		<xs:schema targetNamespace="http://petals.ow2.org/se/bpmn2/sample/order">
			<xs:complexType name="ItemType">
				<xs:sequence>
					<xs:element name="reference" type="xs:string" minOccurs="1" maxOccurs="1" />
					<xs:element name="quantity" type="xs:int" minOccurs="1" maxOccurs="1" />
				</xs:sequence>
			</xs:complexType>
			<xs:element name="newOrderRequest">
				<xs:complexType>
					<xs:sequence>
						<xs:element name="customerName" type="xs:string" minOccurs="1" maxOccurs="1" />
						<xs:element name="address" type="xs:string" minOccurs="1" maxOccurs="1" />
						<xs:element name="items">
							<xs:complexType>
								<xs:sequence>
									<xs:element name="item" type="tns:ItemType"
										maxOccurs="unbounded" />
								</xs:sequence>
							</xs:complexType>
						</xs:element>
					</xs:sequence>
				</xs:complexType>
			</xs:element>
			<xs:element name="newOrderResponse">
				<xs:complexType>
					<xs:sequence>
						<xs:element name="orderId" type="xs:string" minOccurs="1" maxOccurs="1" />
					</xs:sequence>
				</xs:complexType>
			</xs:element>
			
			<xs:element name="validOrderRequest">
            <xs:complexType>
               <xs:sequence>
                  <xs:element name="orderId" type="xs:string" minOccurs="1" maxOccurs="1" />
                  <xs:element name="validationStepId" type="xs:string" minOccurs="1" maxOccurs="1" />
                  <xs:element name="isValidated" type="xs:boolean" minOccurs="1" maxOccurs="1" />
                  <xs:element name="creditCardNumber" type="xs:string" minOccurs="1" maxOccurs="1" />
               </xs:sequence>
            </xs:complexType>
         </xs:element>
         <xs:element name="validOrderResponse" type="xs:string" />

         <xs:element name="searchOrderRequest">
            <xs:complexType>
               <xs:sequence>
                  <xs:element name="orderId" type="xs:string" minOccurs="0" maxOccurs="1" />
                  <xs:element name="isInProgress" type="xs:boolean" minOccurs="0" maxOccurs="1" />
                  <xs:element name="responsibleUser" type="xs:string" minOccurs="0" maxOccurs="1" />
                  <xs:element name="responsibleGroup" type="xs:string" minOccurs="0" maxOccurs="1" />
               </xs:sequence>
            </xs:complexType>
         </xs:element>
         <xs:element name="searchOrderResponse" type="xs:string" />
		</xs:schema>
	</wsdl:types>

	<!-- Message definitions for input and output -->
	<wsdl:message name="newOrderRequest">
		<wsdl:part name="newOrderRequest" element="tns:newOrderRequest" />
	</wsdl:message>
	<wsdl:message name="newOrderResponse">
		<wsdl:part name="newOrderResponse" element="tns:newOrderResponse" />
	</wsdl:message>
   <wsdl:message name="validOrderRequest">
      <wsdl:part name="validOrderRequest" element="tns:validOrderRequest" />
   </wsdl:message>
   <wsdl:message name="validOrderResponse">
      <wsdl:part name="validOrderResponse" element="tns:validOrderResponse" />
   </wsdl:message>
   <wsdl:message name="searchOrderRequest">
      <wsdl:part name="searchOrderRequest" element="tns:validOrderRequest" />
   </wsdl:message>
   <wsdl:message name="searchOrderResponse">
      <wsdl:part name="searchOrderResponse" element="tns:searchOrderResponse" />
   </wsdl:message>

	<!-- Port (interface) definitions -->
	<wsdl:portType name="Order">
		<wsdl:operation name="newOrder">
			<wsdl:input message="tns:newOrderRequest" />
			<wsdl:output message="tns:newOrderResponse" />
		</wsdl:operation>
		<wsdl:operation name="validOrder">
			<wsdl:input message="tns:validOrderRequest" />
			<wsdl:output message="tns:validOrderResponse" />
		</wsdl:operation>
		<wsdl:operation name="searchOrder">
			<wsdl:input message="tns:searchOrderRequest" />
			<wsdl:output message="tns:searchOrderResponse" />
		</wsdl:operation>
	</wsdl:portType>

</wsdl:definitions>

Implementation part

<?xml version="1.0" encoding="UTF-8"?>
<wsdl:definitions xmlns:tns="http://petals.ow2.org/se/bpmn2/sample/order"
	xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
	xmlns:bpmn="http://petals.ow2.org/se/bpmn2/1.0" targetNamespace="http://petals.ow2.org/se/bpmn2/sample/order">

	<wsdl:import location="OrderAbstract.wsdl"
		namespace="http://petals.ow2.org/se/bpmn2/sample/order" />

	<!-- Port bindings to SE BPMN2 -->
	<wsdl:binding name="OrderBinding" type="tns:Order">
		<wsdl:operation name="newOrder">
			<bpmn:operation bpmnAction="startEvent" />
			<bpmn:input-parameter name="processId" value="newOrder" />
			<bpmn:input-parameter name="startEvent" value="default" />
			<bpmn:variable name="customerName" value="/newOrderRequest/customerName" />
			<bpmn:variable name="address" value="/newOrderRequest/address" />
			<bpmn:output xsl="newOrderOutput.xsl" />
			<wsdl:input />
			<wsdl:output />
		</wsdl:operation>
		<wsdl:operation name="validOrder">
			<bpmn:operation bpmnAction="completeTaskOp" />
			<bpmn:input-parameter name="processInstanceId" value="/validOrderRequest/orderId" />
			<bpmn:input-parameter name="taskDefinitionKey" value="validOrder" />
			<bpmn:variable name="validationApproved" value="/validOrderRequest/isValidated" />
			<bpmn:variable name="creditCardNumber" value="/validOrderRequest/creditCardNumber" />
			<bpmn:output xsl="validOrderOutput.xsl" />
			<wsdl:input />
			<wsdl:output />
		</wsdl:operation>
		<wsdl:operation name="searchOrder">
			<bpmn:operation bpmnAction="retrieveProcInst" />
         <bpmn:input-parameter name="processInstanceId" value="/searchOrderRequest/orderId" />
         <bpmn:input-parameter name="isActive" value="/searchOrderRequest/isInProgress" />
         <bpmn:input-parameter name="responsibleUser" value="/searchOrderRequest/responsibleUser" />
         <bpmn:input-parameter name="responsibleGroup" value="/searchOrderRequest/responsibleGroup" />
         <bpmn:output xsl="searchOrderOutput.xsl" />
			<wsdl:input />
			<wsdl:output />
		</wsdl:operation>
	</wsdl:binding>

</wsdl:definitions>
Enter labels to add to this page:
Please wait 
Looking for a label? Just start typing.