{section}
{column:width=60%}
h1. Usage of Petals CLI
{code}
usage: Petals JMX Command Line Interface
[-d] [-y] [-h <host>] [-n <port>] [-u <user>] [-p <password>] [-H | -V | -f <file> | -c <command> <command-args> | -C]
-c,--command <command> Execute a command given on the command line.
-C,--console Enable the mode 'console'.
-d,--debug Print stack trace and debugging informations
-f,--file <filename> Enable the script file execution. If filename is '-', commands are read from the stdin.
-H,--help Print this help message and exit.
-h,--host <host> remote petals ESB host name.
-n,--port <port> port number.
-p,--password <password> password.
-u,--user <user> username.
-V,--version Print the version number and exit.
Which evolution would you like on Petals? Share it! http://www.petalslink.com/feedback
{code}
h1. Available commands of Petals CLI
When launched petals-cli, it offers the following commands :
- *deploy*: Deploy and start a JBI artifact in petals container.
- *exit*: Exit this shell.
- *help*: Display this help message or help for a specific command.
- *listartefacts*: List JBI artifacts name and current status.
- *listregistry*: List the entries of the registry.
- *load*: Load properties from files.
- *print*: Print a message.
- *pwd*: Print the working directory.
- *set*: Assign a value to the system property named key.
- *show*: Print informations about a JBI artifact.
- *shutdown*: Shutdown the container.
- *stop*: Stop the container.
- *undeploy*: Stop and uninstall or undeploy JBI artifacts.
- *version*: Print version informations about petals container.
{column}
{column:width=25%}
{panel:title=Table of contents}{toc}{panel}
{panel:title=Contributors}{contributors:order=name|mode=list}{panel}
{column}
{section}
h1. Use cases
Petals CLI realizes the following use-cases.
h2. Petals CLI capabilities about script and shell usages
h3. Interactive console
Launching the Petals CLI with the following command line starts an interactive console with a prompt where the user can enter commands:
{code}
> ./petals-cli.sh -C
Type 'help' for help.
------------------------------------------------------------------------------
petals-cli>
{code}
This command is wrapped by another shell: petals-cli-console.sh
h3. Execution of a Petals CLI command directly on the command line
Launching the Petals CLI with the following command line executes the command specified on the command line:
{code}
> ./petals-cli.sh -c <command> <command-args>
{code}
h3. Execution of a Petals script file
Launching the Petals CLI with the following command line executes commands of a Petals script:
{code}
> ./petals-cli.sh -f <filename>
{code}
{info}A Petals script is text file containing command supported by Petals CLI.{info}
h3. Execution of an inlined Petals script
Launching the Petals CLI with the following command line executes commands provided through the 'stdin':
{code}
> cat <filename> | ./petals-cli.sh -f -
> ./petals-cli.sh -f - << EOF
<command1> <command1-args>
<command2> <command2-args>
EOF
{code}
h2. Connection to a Petals node
h3. Connection options from the command line
All parameters needed to a JMX connection to a remote Petals node must be configurable on the command line as options:
{code}
> ./petals-cli.sh -h <host> -n <port> -u <user> -p <password> -c <command>
> ./petals-cli.sh -h <host> -n <port> -u <user> -p <password> -C
Conected on <host1>:<port1> with <user1>
petals-cli>
{code}
h3. Interacting with several Petals node without exiting Petals CLI
In interactive mode or script mode, we should be able to close a connection and open another one without leaving Petals CLI. This is done by commands 'close' and 'open'. If no arguments are set on command 'open', default values (localhost:7700, login=petals, pwd=petals) are used:
{code}
> ./petals-cli.sh -C
Type 'help' for help.
------------------------------------------------------------------------------
petals-cli> open <user1>:<password1>@<host1>:<port1>
Conected on <host1>:<port1> with '<user1>'
petals-cli> close
petals-cli> open
Conected on localhost:7700 with 'petals'
{code}
h3. Default connection
By default (if no argument or option is set):
- In mode 'console', the connexion is establish on command 'open' to localhost:7700 with credentials 'petals/petals',
{code}
> ./petals-cli.sh -C
Type 'help' for help.
------------------------------------------------------------------------------
petals-cli> open
Conected on localhost:7700 with 'petals'
{code}
- In mode 'command line', connexion parameter are mandatory
{code}
> ./petals-cli.sh -h <host> -n <port> -u <user> -p <password> -c <command>
{code}
- In mode 'script', the connexion is establish on command 'open' to localhost:7700 with credentials 'petals/petals'
{code}
> ./petals-cli.sh -f - << EOF
open
EOF
{code}
h2. Petals CLI commands
h3. Installation/Deployment and start of an artifact in one command
Petals CLI is able to install/deploy and start a JBI artifact without distinction between shared-library, component and service assembly using the following command:
{code}
deploy <artifact-file> [<configuration-file> | <configuration-properties>]
{code}
where:
- {{<artifact-file>}} is the local file name or the URL of the artifact to install or deploy and start
- {{<configuration-file>}} is the local file name or the URL of the properties file used to configure the artifact. This argument is used only if the component is a component. It has no sens for other artifacts. This argument is exclusive with {{<configuration-properties>}}.
- {{<configuration-properties>}} is a list of '{{<property-name>=<property-value>}}', separated by space, where {{<property-name>}} is the name of the property to configure with {{<property-value>}}. This argument is used only if the component is a component. It has no sens for other artifacts. This argument is exclusive with {{<configuration-file>}}.
h3. Uninstallation/Undeployment and stop of an artifact in one command
Petals CLI is able to stop and uninstall/undeploy a JBI artifact without distinction between shared-library, component and service assembly using the following command:
{code}
undeploy [ <artifact-file> | [<artifact-type> <artifact-id>] ]
{code}
where:
- {{<artifact-file>}} is the local file name or the URL of the artifact to undeploy
- {{artifact-id}} is the nature (SL, component, SA) of the artifact to undeploy
- {{artifact-id}} is the JBI identifier of the artifact to undeploy
If no arguments is set, all artifacts are undeployed. In this case a confirmation is expected, except is the flag 'yes' is set on the command line. A confirmation message is displayed in the mode 'console', except is the flag 'yes' is set on the command line.
{column:width=60%}
h1. Usage of Petals CLI
{code}
usage: Petals JMX Command Line Interface
[-d] [-y] [-h <host>] [-n <port>] [-u <user>] [-p <password>] [-H | -V | -f <file> | -c <command> <command-args> | -C]
-c,--command <command> Execute a command given on the command line.
-C,--console Enable the mode 'console'.
-d,--debug Print stack trace and debugging informations
-f,--file <filename> Enable the script file execution. If filename is '-', commands are read from the stdin.
-H,--help Print this help message and exit.
-h,--host <host> remote petals ESB host name.
-n,--port <port> port number.
-p,--password <password> password.
-u,--user <user> username.
-V,--version Print the version number and exit.
Which evolution would you like on Petals? Share it! http://www.petalslink.com/feedback
{code}
h1. Available commands of Petals CLI
When launched petals-cli, it offers the following commands :
- *deploy*: Deploy and start a JBI artifact in petals container.
- *exit*: Exit this shell.
- *help*: Display this help message or help for a specific command.
- *listartefacts*: List JBI artifacts name and current status.
- *listregistry*: List the entries of the registry.
- *load*: Load properties from files.
- *print*: Print a message.
- *pwd*: Print the working directory.
- *set*: Assign a value to the system property named key.
- *show*: Print informations about a JBI artifact.
- *shutdown*: Shutdown the container.
- *stop*: Stop the container.
- *undeploy*: Stop and uninstall or undeploy JBI artifacts.
- *version*: Print version informations about petals container.
{column}
{column:width=25%}
{panel:title=Table of contents}{toc}{panel}
{panel:title=Contributors}{contributors:order=name|mode=list}{panel}
{column}
{section}
h1. Use cases
Petals CLI realizes the following use-cases.
h2. Petals CLI capabilities about script and shell usages
h3. Interactive console
Launching the Petals CLI with the following command line starts an interactive console with a prompt where the user can enter commands:
{code}
> ./petals-cli.sh -C
Type 'help' for help.
------------------------------------------------------------------------------
petals-cli>
{code}
This command is wrapped by another shell: petals-cli-console.sh
h3. Execution of a Petals CLI command directly on the command line
Launching the Petals CLI with the following command line executes the command specified on the command line:
{code}
> ./petals-cli.sh -c <command> <command-args>
{code}
h3. Execution of a Petals script file
Launching the Petals CLI with the following command line executes commands of a Petals script:
{code}
> ./petals-cli.sh -f <filename>
{code}
{info}A Petals script is text file containing command supported by Petals CLI.{info}
h3. Execution of an inlined Petals script
Launching the Petals CLI with the following command line executes commands provided through the 'stdin':
{code}
> cat <filename> | ./petals-cli.sh -f -
> ./petals-cli.sh -f - << EOF
<command1> <command1-args>
<command2> <command2-args>
EOF
{code}
h2. Connection to a Petals node
h3. Connection options from the command line
All parameters needed to a JMX connection to a remote Petals node must be configurable on the command line as options:
{code}
> ./petals-cli.sh -h <host> -n <port> -u <user> -p <password> -c <command>
> ./petals-cli.sh -h <host> -n <port> -u <user> -p <password> -C
Conected on <host1>:<port1> with <user1>
petals-cli>
{code}
h3. Interacting with several Petals node without exiting Petals CLI
In interactive mode or script mode, we should be able to close a connection and open another one without leaving Petals CLI. This is done by commands 'close' and 'open'. If no arguments are set on command 'open', default values (localhost:7700, login=petals, pwd=petals) are used:
{code}
> ./petals-cli.sh -C
Type 'help' for help.
------------------------------------------------------------------------------
petals-cli> open <user1>:<password1>@<host1>:<port1>
Conected on <host1>:<port1> with '<user1>'
petals-cli> close
petals-cli> open
Conected on localhost:7700 with 'petals'
{code}
h3. Default connection
By default (if no argument or option is set):
- In mode 'console', the connexion is establish on command 'open' to localhost:7700 with credentials 'petals/petals',
{code}
> ./petals-cli.sh -C
Type 'help' for help.
------------------------------------------------------------------------------
petals-cli> open
Conected on localhost:7700 with 'petals'
{code}
- In mode 'command line', connexion parameter are mandatory
{code}
> ./petals-cli.sh -h <host> -n <port> -u <user> -p <password> -c <command>
{code}
- In mode 'script', the connexion is establish on command 'open' to localhost:7700 with credentials 'petals/petals'
{code}
> ./petals-cli.sh -f - << EOF
open
EOF
{code}
h2. Petals CLI commands
h3. Installation/Deployment and start of an artifact in one command
Petals CLI is able to install/deploy and start a JBI artifact without distinction between shared-library, component and service assembly using the following command:
{code}
deploy <artifact-file> [<configuration-file> | <configuration-properties>]
{code}
where:
- {{<artifact-file>}} is the local file name or the URL of the artifact to install or deploy and start
- {{<configuration-file>}} is the local file name or the URL of the properties file used to configure the artifact. This argument is used only if the component is a component. It has no sens for other artifacts. This argument is exclusive with {{<configuration-properties>}}.
- {{<configuration-properties>}} is a list of '{{<property-name>=<property-value>}}', separated by space, where {{<property-name>}} is the name of the property to configure with {{<property-value>}}. This argument is used only if the component is a component. It has no sens for other artifacts. This argument is exclusive with {{<configuration-file>}}.
h3. Uninstallation/Undeployment and stop of an artifact in one command
Petals CLI is able to stop and uninstall/undeploy a JBI artifact without distinction between shared-library, component and service assembly using the following command:
{code}
undeploy [ <artifact-file> | [<artifact-type> <artifact-id>] ]
{code}
where:
- {{<artifact-file>}} is the local file name or the URL of the artifact to undeploy
- {{artifact-id}} is the nature (SL, component, SA) of the artifact to undeploy
- {{artifact-id}} is the JBI identifier of the artifact to undeploy
If no arguments is set, all artifacts are undeployed. In this case a confirmation is expected, except is the flag 'yes' is set on the command line. A confirmation message is displayed in the mode 'console', except is the flag 'yes' is set on the command line.