{section}
{column}



h1. PEtALS-BC-FTP

The petals-bc-ftp component allows to put, get,list or delete files on an FTP server. FTP protocol (RFC959 ) is described at: [http://www.w3.org/Protocols/rfc959/|http://www.w3.org/Protocols/rfc959/]\\
*Figure* *1. ftp component mechanism*
\\ !ftp.png|border=1,width=546,height=320!\\


h1. Feature

The FTP component is a Binding Component (BC) which supports ftp command . This component allows to :
* Provide a set of 5 operation :
** *put:* Write the received JBI messages in a file with a specified name.
** *mput:* Write the JBI message attachments it receives into files.
** *get:* Retrieve *Xml* file corresponding to a pattern, from a folder. Return it as message payload.
** *getAsAttachment:* Retrieve the first file corresponding to a pattern, from a folder*.\* Return it as message's attachment.(XOP standard)
** *mGet:* Retrieve files corresponding to a pattern, from a folder*.\* Return them as message's attachment.
** *checkFile:* Check the availability of a file.
** *del:* Delete one file.
** *dir:* List the content of a folder.

These operations are described in an embedded WSDL.
{info}All attachment are processed by using XOP rules.(XML-binary Optimized Packaging : [http://www.w3.org/TR/xop10/] ){info}



h1. Recommend usage

Petals FTP binding component allows JBI consumers to call FTP command. A JBI endpoint is registered into the JBI environment, and is linked to an FTP server, with a configured user/password.To use this service, the consumer has to call explicitely the *{service* *namespace{*}*}get/getAsAttachment/mget/put/mput/dir/del* operations.When the FTP component receives a message exchange from Petals platform, it call the FTP command associate with the jbi operation.





h1. FTP Service

{include:0 CDK SU Provide Configuration}


h2. PROVIDE MODE


In provide mode, the component expose an external service in the JBI environment to send FTP commands on an FTP server
This service can either connects to an FTP server configured in the ServiceUnit, or retrieve the FTP server information in the XML message request.
\\

h3. Usage

When using the FTP service, you can optionnaly define the FTP connection information in your XML request. If you don't, the service unit parameters are used.
\\
To configure the FTP connection in your XML message request, you have to provide a connection element.
\\ {code:lang=xml}
...
<ver:connection>
<ver:server>?</ver:server>
<ver:port>?</ver:port>
<ver:user>?</ver:user>
<ver:password>?</ver:password>
<!--Optional:-->
<ver:folder>?</ver:folder>
<ver:transfer-type>ascii|binary</ver:transfer-type>
<ver:connection-mode>active|passive (optional, default is active)</ver:connection-mode>
<ver:delete-processed-files>true|false(optional, default is active)</ver:delete-processed-files>
<ver:encoding>?</ver:encoding>
</ver:connection>
...
{code}



h4. Put Operation

When the put operation is set on the incoming IN message, the component write the XML message to the FTP server.
\\

The IN message looks like :

{code:lang=xml}<?xml version="1.0" encoding="UTF-8"?>
<ver:put xmlns:ver="http://petals.ow2.org/components/ftp/version-3">
<ver:body>xml body</ver:body>
<ver:filename>file name on the FTP server</ver:filename>
<!--Optional:-->
<ver:connection>
...
</ver:connection>
</ver:put>
{code}
The service does not return a message.

The service might return an error when an element in the request is missing or if the FTP connection failed.

The available exchange pattern is : *InOnly*.
\\


h4. MPut Operation

When the mput operation is set on the incoming IN message, the component write the attachments on the FTP server.

The IN message looks like :

{code:lang=xml}<?xml version="1.0" encoding="UTF-8"?>
<ver:mput xmlns:ver="http://petals.ow2.org/components/ftp/version-3">
<ver:attachments>
<ver:filename><xop:Include xmlns:xop="http://www.w3.org/2004/08/xop/include" href="cid:test1.xml"/></ver:filename>
<ver:filename><xop:Include xmlns:xop="http://www.w3.org/2004/08/xop/include" href="cid:test2.xml"/></ver:filename>
</ver:attachments>
<!--Optional:-->
<ver:connection>
...
</ver:connection>
</ver:mput>
{code}
The service does not return a message.
\\

The service might return an error when an element in the request is missing or if the FTP connection failed.

The available exchange pattern is : *InOnly*.
\\


h4. Get Operation

When the get operation is set on the incoming IN message, the component retrieve ONE file from the FTP server and return it as an XML message content.
\\

The name of the file to retrieve is set in the XML IN content of the message.
\\

The IN message looks like :
\\
{code:lang=xml}<?xml version="1.0" encoding="UTF-8"?>
<ver:get xmlns:ver="http://petals.ow2.org/components/ftp/version-3">
<ver:filename>file name to retrieve</ver:filename>
<!--Optional:-->
<ver:connection>
...
</ver:connection>
</ver:get>
{code}
The OUT message returned to the consumer is the content of the XML file
\\

The service might return a Fault when an element in the request is missing or if the FTP connection failed
\\

The available exchange patterns is : *InOut*.

{info}Only xml file could be processed otherwise an error will be raised.{info}



h4. GetAsAttachment Operation

When the get operation is set on the incoming IN message, the component retrieve ONE file from the FTP server and return it as an attachment.

The name of the file to retrieve is set in the XML IN content of the message.

The IN message looks like :
{code:lang=xml}<?xml version="1.0" encoding="UTF-8"?>
<ver:getAsAttachment xmlns:ver="http://petals.ow2.org/components/ftp/version-3">
<ver:filename>file name to retrieve</ver:filename>
<!--Optional:-->
<ver:connection>
...
</ver:connection>
</ver:getAsAttachment>
{code}
The OUT message returned to the consumer contains files, as attachments, and an XML message report :
{code:lang=xml}<?xml version="1.0" encoding="UTF-8"?>
<tns:getAsAttachmentResponse xmlns:tns="http://petals.ow2.org/components/ftp/version-3">
<tns:attachments>
<tns:filename><xop:Include xmlns:xop="http://www.w3.org/2004/08/xop/include" href="cid:test1.xml"/></tns:filename>
<tns:filename><xop:Include xmlns:xop="http://www.w3.org/2004/08/xop/include" href="cid:test2.xml"/></tns:filename>
</tns:attachments>
</tns:getAsAttachmentResponse>
{code}
The service might return a Fault when an element in the request is missing or if the FTP connection failed

The available exchange pattern is : *InOut*.



h4. MGet Operation

When the mget operation is set on the incoming IN message, the component retrieves files from the FTP server, according to the file names (or filters) set in the XML request.
\\
There is no recursivity, sub folders are ignored.

Each file is set in the OUT message as an attachment. The IN message looks like :
\\
{code:lang=xml}<?xml version="1.0" encoding="UTF-8"?>
<ver:mget xmlns:ver="http://petals.ow2.org/components/ftp/version-3">
<!--1 or more repetitions:-->
<ver:filename>*.xml</ver:filename>
<ver:filename>myFile.txt</ver:filename>
<!--Optional:-->
<ver:connection>
...
</ver:connection>
</ver:mget>
{code}
The OUT message returned to the consumer contains files, as attachments, and an XML message report :
\\
{code:lang=xml}<?xml version="1.0" encoding="UTF-8"?>
<tns:mgetResponse xmlns:tns="http://petals.ow2.org/components/ftp/version-3">
<tns:attachments>
<tns:filename><xop:Include xmlns:xop="http://www.w3.org/2004/08/xop/include" href="cid:test1.xml"/></tns:filename>
<tns:filename><xop:Include xmlns:xop="http://www.w3.org/2004/08/xop/include" href="cid:test2.xml"/></tns:filename>
</tns:attachments>
</tns:mgetResponse>
{code}
The service might return a Fault when an element in the request is missing or if the FTP connection failed
\\

The available exchange pattern is : *InOut*.


h4. Dir Operation

When the dir operation is set on the incoming IN message, the component returns the file names listed from the FTP
server.
The IN message looks like :{code:lang=xml}
<?xml version="1.0" encoding="UTF-8"?><ver:dir xmlns:ver="http://petals.ow2.org/components/ftp/version-3>
<!--Optional:-->
<ver:connection>
...
</ver:connection>
</ver:dir>{code}
The OUT message returned to the consumer is defined as follow :

{code:lang=xml}<tns:dirResponse xmlns:tns="http://petals.ow2.org/components/ftp/version-3">
<!--Zero or more repetitions:-->
<tns:filename>file1.txt</tns:filename>
<tns:filename>linux.jpg</tns:filename>
</tns:dirResponse>
{code}
The service might return a Fault when an element in the request is missing or if the FTP connection failed

The available exchange pattern is : *InOut*.


h4. Del Operation

When the del operation is set on the incoming IN message, the component delete the remote file.
The IN message looks like :
{code:lang=xml}
<?xml version="1.0" encoding="UTF-8"?><ver:del xmlns:ver="http://petals.ow2.org/components/ftp/version-3>
<ver:filename>?</ver:filename>
<!--Optional:-->
<ver:connection>
...
</ver:connection>
</ver:del>
{code}
The service does not return a message.
The service might return an Error when an element in the request is missing or if the FTP connection failed.
The available exchange pattern is : InOnly.

h3. Configuration

h4. Service Unit descriptor

The service unit is configurable via its extensions in the jbi.xml file:
\\
{code:lang=xml}<?xml version="1.0" encoding="UTF-8"?>
<!-- JBI descriptor for PEtALS' "petals-bc-ftp" (FTP), version 3.0 -->
<jbi:jbi version="1.0"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:jbi="http://java.sun.com/xml/ns/jbi"
xmlns:petalsCDK="http://petals.ow2.org/components/extensions/version-5"
xmlns:ftp="http://petals.ow2.org/components/ftp/version-3"
xmlns:interfaceNs="http://petals.ow2.org/components/ftp/version-3"
xmlns:serviceNs="http://myservice">
<!-- Import a Service into PEtALS or Expose a PEtALS Service use a BC. -->
<jbi:services binding-component="true">
<!-- Import a Service into PEtALS provides a Service. -->
<jbi:provides
interface-name="interfaceNs:Ftp"
service-name="serviceNs:FtpSrv"
endpoint-name="FtpSrvEndpoint">
<!-- CDK specific elements -->
<petalsCDK:wsdl>FtpService.wsdl</petalsCDK:wsdl>
<!-- Component specific elements -->
<ftp:server>server</ftp:server>
<ftp:port>21</ftp:port>
<ftp:user>user</ftp:user>
<ftp:password>password</ftp:password>
<ftp:folder>folder</ftp:folder>
</jbi:provides>
</jbi:services>
</jbi:jbi>{code}
\\
&nbsp; *Service Unit attributes to provide services*
{table-plus}

| port | the port number of the ftp server | 21 | No |
| user | the user login name used to connect to the server | | Yes (except when using FtpService) |
| password | the user password | | Yes (except when using FtpService) |
| folder | the folder on the FTP server | | No |
| filename | file name for the standard PUT operation (write the XML message content on the FTP server) | content.xml | No |
| connection-mode | In Active mode, the connection port is set by the client. In Passive mode, it is set by the server (default is Active) | active | No |
| transfer-type | transfer mode used for put or get files ascii/binary | ascii | No |
| delete-processed-files | If true, the service delete the files processed by operation get or mget | false | No \\ |
| encoding | Set the encoding encoding value used to process ftp operation. | Default JVM Encoding \\ | No \\ |
{table-plus}

h4. Service Unit content&nbsp;

The Service Unit has to contain the following elements, packaged in an archive:
\\
* The META-INF/jbi.xml descriptor file, has described above,
* An optional wsdl file describing the related service

{code}service-unit.zip
+ META-INF
- jbi.xml (as defined above)
- service.wsdl (optional)
{code}

{panel:title=Table of contents}{toc}{panel}
{panel:title=Contributors}{contributors:order=name|mode=list}{panel}
{column}
{section}