{section}
{column}

{note}This is the documentation section for the *development version* of Petals ESB Deployer.
Please, note that such a documentation and product may be incomplete and/or unstable. For production environment, please use the latest public release of product and documentation.
{note}

h1. Introduction

Petals ESB Deployer is a tool to manage the deployment of a whole Petals ESB bus.

Deploying a whole Petals ESB bus includes to deploy Petals ESB containers, Petals ESB Hazelcast Registry, and service consumers or providers running on their binding components or service-engines correctly configured. The architecture of the Petals ESB bus and service providers/consumers to deploy are defined into a model.

Petals ESB Deployer is embedded into Petals ESB CLI through different commands:
* the command {{deploy}} is extended to deploy a whole Petals ESB bus, and to migrate an existing deployment to a new version,
* the command {{undeploy}} is extended to undeploy a whole Petals ESB bus,
* the dedicated command {{check-deployment}} will check an existing Petals ESB bus against a given model describing the expected Petals ESB bus.

{warning}
Petals ESB Deployer *1.0.0* is provided with [Petals ESB CLI *3.2.0*|petalsclisnapshot:Petals ESB CLI 3.2.0-SNAPSHOT].
{warning}

{column}
{column:width=40%}
{panel:title=Table of contents}{toc}{panel}
{panel:title=Contributors}{contributors:order=name|mode=list}{panel}
{column}
{section}

h1. Use cases

The goal of Petals ESB Deployer is to resolve several deployment problematics:
* how to simplify the deployment of a Petals ESB bus avoiding to use scripts for automating deployment ?
* how to upgrade an existing deployment of a Petals ESB bus to a new version of this Petals ESB bus,
* how to deploy a set of service providers and consumers on different environments, for example DEV, TEST or PROD where the Petals ESB bus topology and external resources are different ?
* how to deploy a Petals ESB bus on different environments, for example STAGING, PRE-PROD, PROD where the Petals ESB bus topology is the same but where machines running Petals ESB bus and external resources are differents ?

h2. Deployment samples

h3. Classic: Different topologies following project progress

In this use case sample, service providers/consumers are deployed on a topology that is different according to the project step: DEV, TEST, PRE-PROD and PROD. Service providers/consumers are the same on each environment, but their instance number can be different.

The delivered artefacts are:
* the list of service-unit that must be deployed,
* the service-assemblies or deployable service units as archives to deploy.
With the Petals ESB architect, the team "TEST" defines a simplified version of the Petals ESB bus topology that will be used for testing. Finally we can have such a topology:
!deployment-samples-classic-TEST.png!

Once tests are passed, we validate deliverables on a pre-production environment for which the Petals ESB bus topology is the same than the production environment. This topology was defined by the Petals ESB architect in agreement with production operators. Only machines and few configuration items are different between environments PRE-PROD and PROD. Service units deployed are the same than the one of the testing environment:
!deployment-samples-classic-PRE-PROD.png!

If no problem has been detected in pre-production stage, the project is deployed on the production environment with the same topology and the same service-units than the one of the pre-production environment, except machines and few parameters:
!deployment-samples-classic-PROD.png!

h1. Modeling your deployments

h2. Model overview

Petals ESB Deployer is based on a model defining your Petals ESB bus to deploy. This model contains all components and their configurations forming your Petals ESB bus.

The model of your Petals ESB bus is composed of several parts:
* a *Service-units Object Model*: that list all service-units that must be deployed into your Petals ESB bus,
* a *Topology Object Model*: that defines the topology of your Petals ESB bus,
* a *Bus Object Model* that defines:
** where are running the service-units, on which Petals ESB container of your topology,
** where are running your Petals ESB containers, on which machine,
** where are running your Petals ESB Hazelcast Registry nodes, on which machines,
** which external resources are to be used.

!model.png!

{petalslink}
Ce modèle est dessiner avec le logiciel DIA. Fichier source du modèle disponible en attachement.
{petalslink}

{anchor:serviceUnitsObjectModel}
h2. Service-units Object Model

This model defines the set of service units to deploy on your Petals ESB bus. This model will be mainly written by development teams because they have the knowledge of service units to deploy.

!serviceUnitsObjectModel.png!

This model is composed of following elements:
* {{service-units}}, the list of service units that must be deployed,
* {{service-unit}}, one service unit to deploy:
** {{id}}, the identifier of this service-unit in the model. Can be different from the service unit name,
** {{url}}, the URL of the associated archive that can be a service assembly or a deployable service unit.
** {{placeholders}}, the set of placeholders that the service unit requires for its execution,
* {{placeholder}}, a placeholder required by a service-unit:
** {{key}}, the place holder name as used in the service-unit. A value is associated to this placeholder in the [bus object model|#busObjectModel].

{anchor:topologyObjectModel}
h2. Topology Object Model

This model defines the topology of your Petals ESB bus. This model will be mainly written by the Petals ESB bus architect.

!topologyObjectModel.png!

This model is composed of following elements:
* {{topology}}, the topology definition of your Petals ESB bus, with:
** {{containers}}, its different Petals ESB containers as a list of {{container}},
** {{registry}}, the registry used in your topology. Optional.
* {{container}}, a Petals ESB container member of your topology:
** {{id}}, identifier of the Petals ESB container as used as name in the file {{topology.xml}},
* {{standalone-registry}}, the registry is implemented by Petals ESB Standalone Registry, default implementation for a standalone topology. Can not be used for a distributed topology,
* {{hazelcast-registry}}, the registry is implemented by Petals ESB Hazelcast Registry, default implementation for a distributed topology:
** {{members}}, the members of the Petals ESB Hazelcast Registry,
* {{hazelcast-registry-member}}, a member of the Petals ESB Hazelcast Registry:
** {{id}}, identifier of the Petals ESB Hazelcast Registry member as used as name in the file {{cluster.xml}},

{anchor:busObjectModel}
h2. Bus Object Model

This model defines your Petals ESB bus. This model will be mainly written by the Petals ESB bus architect in agreement with operators.

!busObjectModel.png!

This model is composed of following elements:
* {{Bus}}, the Petals ESB bus to deploy, with:
** {{service-units}}, the service units to deploy,
** {{registry-instance}}, the instance of the registry to used in the topology,
** {{container-instances}}, the instances of Petals ESB containers forming the Petals ESB bus,
** {{machines}}, a list of {{machine}} on which the current Petals ESB bus is running,
* {{machine}}, a machine on which a part of the Petals ESB bus is running:
** {{id}}, identifier of the machine used as reference key for {{container-instance}} and {{hazelcast-registry-member-instance},
** several types of machines are supported:
*** {{provisioned-machine}}, a provisioned machine as a physical machine or a virtual machine already existing:
**** {{hostname}}, hostname or IP address of the current provisioned machine,
*** {{docker-container}}, a Docker container running a Petals ESB component:
**** {{docker-host-hostname}}, hostname of the Docker host on which the Docker container will be started,
**** {{docker-host-port}}, port of the Docker daemon of the Docker host on which the Docker container will be started,
* {{container-instance}}, the instance of a Petals ESB container defined in the topology model:
** {{reference}}, reference to a {{container}} of the [topology object model|#topologyObjectModel],
** {{host-machine}}, the reference of the machine on which the current Petals ESB Container is running,
** {{jmxPort}}, port JMX of the current Petals ESB container,
** {{jmxUser}}, JMX username of the current Petals ESB container,
** {{jmxPassword}}, JMX password of the current Petals ESB container,
* {{service-unit-instance}}, an instance of a service unit running on a Petals ESB container:
** {{reference}}, reference to a {{service-unit}} of the [service-units object model|#serviceUnitsObjectModel],
** {{container-reference}}, reference to a {{container}} of the [topology object model|#topologyObjectModel],
** {{placeholders}}, the set of {{placeholder-instance}} that must be applied to the current service-unit instance to set the right placeholder values,
* {{placeholder-instance}}, an instance of placeholder to define its value:
** {{reference}}, reference to a {{placeholder}} of the [service-units object model|#serviceUnitsObjectModel],
** {{value}}, value to set to the current placeholder,
* {{hazelcast-registry-instance}} defines the registry instance of the current Petals ESB bus as a Petals ESB Hazelcast Registry instance:
** {{reference}}, the reference of the Petals ESB Hazelcast Registry in the [topology object model|#topologyObjectModel],
** {{group-name}}, name identifying the Petals ESB Hazelcast Registry instance inside the Hazelcast cluster,
** {{group-password}}, password of the Petals ESB Hazelcast Registry instance,
** {{member-instances}}, list of member instances ({{hazelcast-registry-member-instance}}) composing the current Petals ESB Hazelcast Registry instance,
* {{hazelcast-registry-member-instance}}, a member of the current Petals ESB Hazelcast Registry instance:
** {{reference}}, the reference of the member of the Petals ESB Hazelcast Registry in the [topology object model|#topologyObjectModel],
** {{host-machine}}, the reference of the machine on which the current Petals ESB Hazelcast Registry is running,
** {{port}}, the communication port of the current member instance.

h2. Writing your deployment model

The best practice is to write your deployment model with different files, but you are able to write your deployment model in only one file.

h3. Writing your deployment model in separated files

The best practice is to write your deployment model with different files:
* a 1st file for your service units object model, written by your development team,
* a 2nd file for your topology object model, written by the Petals ESB architect,
* and a 3rd file for your bus object model, written by the Petals ESB bus architect in agreement with operators.

h4. Writing a service units object model

Example of a service unit object model:
{code:lang=xml}
<service-units xmlns="http://petals.ow2.org/deployer/models/service-units.om/1.0" targetNamespace="http://petals.ow2.org/deployer/sample.suom">
<service-unit id="su-filetransfer-consume">
<url>mvn://org.ow2.petals.samples.filetransfer/su-filetransfer-consume/4.1.0-1.0.0</url>
</service-unit>
<service-unit id="su-filetransfer-provide">
<url>mvn://org.ow2.petals.samples.filetransfer/su-filetransfer-provide/4.1.0-1.0.0</url>
</service-unit>
</service-units>
{code}

h4. Writing a topology object model

Example of a standalone topology object model:
{code:lang=xml}
<topology xmlns="http://petals.ow2.org/deployer/models/topology.om/1.0" targetNamespace="http://petals.ow2.org/deployer/sample-standalone.tom">
<containers>
<container id="cont-0" />
</containers>
</topology>
{code}

Example of a distributed topology object model:
{code:lang=xml}
<topology xmlns="http://petals.ow2.org/deployer/models/topology.om/1.0" targetNamespace="http://petals.ow2.org/deployer/sample-distributed.tom">
<containers>
<container id="cont-0" />
<container id="cont-1" />
</containers>
<hazelcast-registry>
<members>
<member id="hzlreg-0" />
</members>
</hazelcast-registry>
</topology>
{code}

h4. Writing a bus object model

Example of a bus based on a standalone topology:
{code:lang=xml}
<bus
xmlns="http://petals.ow2.org/deployer/models/bus.om/1.0"
xmlns:suom="http://petals.ow2.org/deployer/sample.suom"
xmlns:tom="http://petals.ow2.org/deployer/sample-standalone.tom"
targetNamespace="http://petals.ow2.org/deployer/sample-standalone.bom">

<!-- Import of the service unit object model -->
<import namespace="http://petals.ow2.org/deployer/sample.suom" location="sample.suom"
importType="http://petals.ow2.org/deployer/models/service-units.om/1.0">
<!-- Import of the topology object model -->
<import namespace="http://petals.ow2.org/deployer/sample-standalone.tom" location="sample-standalone.tom"
importType="http://petals.ow2.org/deployer/models/topology.om/1.0">

<machines>
<provisioned-machine id="machine-00">
<hostname>machine-00.petals.org</hostname>
</provisioned-machine>
</machines>

<container-instances>
<container-instance ref="tom:cont-0" machine-ref="machine-00" jmx-port="7700" jmx-user="petals" jmx-password="petals"/>
</container-instances>

<service-unit-instances>
<service-unit-instance ref="suom:su-filetransfer-consume" container-ref="tom:cont-0" />
<service-unit-instance ref="suom:su-filetransfer-provide" container-ref="tom:cont-0" />
</service-unit>
</bus>
{code}

Example of a bus based on a distributed topology:
{code:lang=xml}
<bus
xmlns="http://petals.ow2.org/deployer/models/bus.om/1.0"
xmlns:suom="http://petals.ow2.org/deployer/sample.suom"
xmlns:tom="http://petals.ow2.org/deployer/sample-distributed.tom"
targetNamespace="http://petals.ow2.org/deployer/sample-standalone.bom">

<!-- Import of the service unit object model -->
<import namespace="http://petals.ow2.org/deployer/sample.suom" location="sample.suom"
importType="http://petals.ow2.org/deployer/models/service-units.om/1.0">
<!-- Import of the topology object model -->
<import namespace="http://petals.ow2.org/deployer/sample-distributed.tom" location="sample-distributed.tom"
importType="http://petals.ow2.org/deployer/models/topology.om/1.0">

<machines>
<provisioned-machine id="machine-00">
<hostname>machine-00.petals.org</hostname>
</provisioned-machine>
<provisioned-machine id="machine-01">
<hostname>machine-01.petals.org</hostname>
</provisioned-machine>
<provisioned-machine id="machine-02">
<hostname>machine-02.petals.org</hostname>
</provisioned-machine>
</machines>

<hazelcast-registry-instance group-name="default-sample" group-password="s3cr3t">
<hazelcast-registry-member-instances>
<hazelcast-registry-member-instance machine-ref="machine-02" port="7900" />
</hazelcast-registry-member-instances>
</hazelcast-registry-instance>

<container-instances>
<container-instance ref="tom:cont-0" machine-ref="machine-00" jmx-port="7700" jmx-user="petals" jmx-password="petals"/>
<container-instance ref="tom:cont-1" machine-ref="machine-01" jmx-port="7700" jmx-user="petals" jmx-password="petals"/>
</container-instances>

<service-unit-instances>
<!-- Service unit deployed on container 'cont-0' -->
<service-unit-instance ref="suom:su-filetransfer-consume" container-ref="tom:cont-0" />
<service-unit-instance ref="suom:su-filetransfer-provide" container-ref="tom:cont-0" />

<!-- Service unit deployed on container 'cont-1' -->
<service-unit-instance ref="suom:su-filetransfer-consume" container-ref="tom:cont-1" />
<service-unit-instance ref="suom:su-filetransfer-provide" container-ref="tom:cont-1" />
</service-unit>
</topology>
{code}

h3. Writing your deployment model in only one file

Example of a bus based on a standalone topology:
{code:lang=xml}
<bus
xmlns="http://petals.ow2.org/deployer/models/bus.om/1.0"
xmlns:tns="http://petals.ow2.org/deployer/sample-standalone.bom"

targetNamespace="http://petals.ow2.org/deployer/sample-standalone.bom">

<suom:service-units xmlns:suom="http://petals.ow2.org/deployer/models/service-units.om/1.0">
<service-unit id="su-filetransfer-consume">
<url>mvn://org.ow2.petals.samples.filetransfer/su-filetransfer-consume/4.1.0-1.0.0</url>
</service-unit>
<service-unit id="su-filetransfer-provide">
<url>mvn://org.ow2.petals.samples.filetransfer/su-filetransfer-provide/4.1.0-1.0.0</url>
</service-unit>
</suom:service-units>

<tom:topology xmlns:tom="http://petals.ow2.org/deployer/models/topology.om/1.0">
<containers>
<container id="cont-0" />
</containers>
</tom:topology>

<machines>
<provisioned-machine id="machine-00">
<hostname>machine-00.petals.org</hostname>
</provisioned-machine>
</machines>

<container-instances>
<container-instance ref="tns:cont-0" machine-ref="machine-00" jmx-port="7700" jmx-user="petals" jmx-password="petals"/>
</container-instances>

<service-unit-instances>
<service-unit-instance ref="tns:su-filetransfer-consume" container-ref="tns:cont-0" />
<service-unit-instance ref="tns:su-filetransfer-provide" container-ref="tns:cont-0" />
</service-unit>
</bus>
{code}

h1. Petals Deployment Model

h2. Source code

Maven project work in progress (POC ?)

[Petals ESB Deployer 1.0.0^petals-deployment-model.zip]



h2. Example project

Here is a project to try making deployment model for an existing project (with script CLI)


[Petals ESB Deployer 1.0.0^hdbank-deployment-model.zip]